Easy installation of lighting fiber

The optical fiber is the main body of the optical fiber lighting system. The function of the optical fiber is to transmit or launch light to a predetermined place. Optical fibers are divided into end-emitting and bulk-emitting. The former means that the light beam reaches the end point and is illuminated by taillights, while the latter itself is a luminous body, forming a flexible beam of light. Fiber optic lamps are mainly used in hotels, bars, KTVs, coffee shops, DISCO, cultural relics protection lighting, waterscape safety lighting and other high-end Entertainment and leisure places.

Fiber optic lighting installation

1. Install the light-emitting device. Generally, the light-emitting device should be placed in a place that is easy to maintain and easy to operate. The indoor illuminator can be directly installed on the dedicated bracket or placed in the distribution box. The outdoor illuminator can be installed directly on the dedicated bracket or placed in the rainproof box. During installation, a reliable power plug should be matched according to the actual situation.

2. Optical fiber installation. The optical fiber is usually bent as far as possible, and it is required to be straight to prevent the loss of bending time. If bending occurs, the radius of the bend should be greater than or equal to twelve times the diameter. Do a good job of waterproofing when entering and exiting the building surface. The line-fed optical fiber is generally laid on the building surface and the surface of the billboard. It can be fixed with staples. The radius should be greater than or equal to twenty times the diameter when bending occurs.

3. The link between the light-emitting fiber and the terminal, and the terminal interface must not be dirty, so that the light source can pass through the fiber smoothly. The cut should be straight and dust-proof during the connection process. Generally, a dedicated connection kit is used to connect with the terminal.